OPA445AP
Manufacturer:
Texas Instruments
Mfr.Part #:
OPA445AP
Datasheet:
Description:
Amplifiers - Op Amps, Buffer, Instrumentation PDIP-8 Through Hole High Voltage Amplifier Number of Circuits:1
| Parameter | Value |
|---|---|
| Length | 9.81 mm |
| Width | 6.35 mm |
| Max Operating Temperature | 85 °C |
| Min Operating Temperature | -25 °C |
| Number of Pins | 8 |
| Height | 5.08 mm |
| Thickness | 3.9 mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| Number of Elements | 1 |
| Output Current | 15 mA |
| Number of Circuits | 1 |
| Bandwidth | 2 MHz |
| Operating Supply Voltage | 45 V |
| Lifecycle Status | Active |
| Max Supply Voltage | 90 V |
| Min Supply Voltage | 20 V |
| Number of Channels | 1 |
| Slew Rate | 15 V/µs |
| Operating Supply Current | 4.2 mA |
| Input Bias Current | 100 pA |
| Dual Supply Voltage | 40 V |
| Nominal Supply Current | 4.7 mA |
| Output Current per Channel | 15 mA |
| Gain Bandwidth Product | 2 MHz |
| Input Offset Voltage (Vos) | 5 mV |
| Max Dual Supply Voltage | 45 V |
| Min Dual Supply Voltage | 10 V |
| Voltage Gain | 110 dB |
| Number of Amplifiers | 1 |
| Nominal Gain Bandwidth Product | 2 MHz |
| I/O Voltage | 5 mV |
| RoHS | Compliant |
| Packaging | Tube |
| Amplifier Type | High Voltage Amplifier |
| Common Mode Rejection Ratio (CMRR) | 95 dB |
| Input Voltage Noise Density | 15 nV/sqrt Hz |
| Power Supply Rejection Ratio (PSRR) | 107.96 dB |
Stock: 2213
Distributors
pcbx
pcbxUnit Price$11.01406
Ext.Price$11.01406
| Qty | Unit Price | Ext.Price |
|---|---|---|
| 1 | $11.01406 | $11.01406 |
| 10 | $8.74251 | $87.42510 |
| 25 | $8.28289 | $207.07225 |
| 50 | $7.84740 | $392.37000 |
| 100 | $7.56613 | $756.61300 |
| 300 | $7.32457 | $2197.37100 |
| 500 | $7.09079 | $3545.39500 |
| 1000 | $7.06564 | $7065.64000 |
| 3000 | $7.04058 | $21121.74000 |
| 5000 | $7.01555 | $35077.75000 |